Piping Tools
Calculate pipe weight, capacity, velocity, cross-sectional areas, slope and the weight of plates and sections for supports.
Free practical calculators for piping, marine, CAD, Excel and everyday engineering work.
Piping design
Ship & marine design
Engineering units
Drawings & coordinates
Practical formula helpers
Find the tools you need for everyday engineering calculations.
Calculate theoretical pipe mass from actual outside diameter, wall thickness, length and material density.
Open calculatorFind the full internal capacity of a straight pipe using its outside diameter, wall thickness and length.
Open calculatorCalculate average full-bore velocity from inside diameter and volumetric flow, with results in m/s and ft/s.
Open calculatorCalculate Darcy–Weisbach friction pressure drop, minor losses and elevation change from bore, length, flow and fluid properties, with Reynolds number and friction factor.
Open calculatorPipe Schedule Chart
Look up outside diameter, wall thickness, bore and weight per meter of steel pipe by NPS and schedule (Sch 5S–160, STD, XS, XXS), and compare schedules.
Open calculatorLook up outside diameter, thickness, raised face, bolt circle, bolt count and size and bolt holes of ASME B16.5 Class 150 and 300 flanges (NPS 1/2–24) in mm and inches.
Open calculatorLook up outside diameter, thickness, bolt circle (PCD), bolt count and thread size and bolt hole diameter of JIS B 2220 5K, 10K, 16K and 20K steel pipe flanges by nominal size (A).
Open calculatorLook up pitch, tensile stress area, tap drill and spanner size of M3–M64 metric threads, and calculate proof load and an estimated tightening torque by property class.
Open calculatorLook up dimensions, area, unit mass (kg/m), moments of inertia and section moduli of KS D 3502 and JIS G 3192 H-beams, and total weight from length and quantity.
Open calculatorCalculate cross-sectional area, weight per meter and total weight of steel plate, flat, round, square and hexagonal bar, H-beams and angles from their dimensions.
Open calculatorGet the mean draft, signed draft difference and trim direction from forward and aft drafts, plus gradient and angle when a reference length is given.
Open calculatorConvert millimeters and inches in both directions, including a fraction rounded to the nearest 1/64 inch.
Open calculatorConvert one pressure value simultaneously to Pa, kPa, MPa, bar, kgf/cm² and psi.
Open calculatorConvert gas flow between standard conditions (Nm³/h, Sm³/h, scf) and actual operating pressure and temperature, with mass flow when the molar mass is given.
Open calculatorConvert drawing length to real length or the reverse using a 1:n scale and optional scale presets.
Open calculatorCalculate signed coordinate changes and 2D/3D straight-line distances between two Cartesian points.
Open calculatorCalculate pipe weight, capacity, velocity, cross-sectional areas, slope and the weight of plates and sections for supports.
Check draft and trim readings and calculate liquid volume in rectangular, vertical and horizontal tanks.
Convert length, pressure, mass, temperature, volume, flow and density.
Calculate drawing scales, SCALE factors, coordinate distances and offsets.
Extract and split tag strings, convert units and explore common Excel functions.
Calculate pipe metal area, kg/m and total mass from OD, wall thickness, length and density, with a carbon-steel example and practical quantity checks.
Read guide 02Piping / GUIDEDistinguish NPS and DN size labels from actual outside diameter, understand NPS 2 and DN 50 notation, and avoid inch-to-mm errors before calculation.
Read guide 03Piping / GUIDEUse v = Q/A with actual internal diameter, convert m³/h and L/min to SI flow, and understand why a smaller bore raises velocity at the same flow rate.
Read guide 04Marine / GUIDEUnderstand forward and aft draft, the two-point mean and signed trim, using FWD 7.8 m and AFT 8.5 m while separating geometry from hydrostatic assessment.
Read guide 05CAD / GUIDECalculate drawing-scale conversion factors, check the 100/50 = 2 example, and distinguish rescaling geometry from model-space, viewport and paper-space settings.
Read guide 06Unit Conversion / GUIDEConvert with exactly 25.4 mm per inch, understand decimal and fractional inches through 1/64, and check rounding error without confusing pipe nominal size with OD.
Read guideEngiCalcLab helps with everyday design work. Check the formula, worked example and scope of every calculator.
Free engineering calculators for piping, marine, CAD and everyday engineering work.