CAD / Offset Calculator

Offset Calculator

Find horizontal and vertical coordinate differences, straight distance and the direction angle from the positive X-axis.

Inputs

Updates as you type

Results

2D distance

5
Results
ΔX · horizontal difference3
ΔY · vertical difference4
Angle53.13 °

Overview

Find horizontal and vertical coordinate differences, straight distance and the direction angle from the positive X-axis. Use it to find the values to type as relative coordinates (@ΔX,ΔY) or distance and angle (@distance<angle) between two points in CAD.

Formula

ΔX = X2 − X1
ΔY = Y2 − Y1
Distance = √(ΔX² + ΔY²)
Angle = atan2(ΔY,ΔX) × 180/π

Example

From (0,0) to (3,4), the horizontal difference is 3, vertical difference is 4, distance is 5 and angle is approximately 53.130°. Going from (10, 10) to (4, 4) gives ΔX −6, ΔY −6, a distance of about 8.485 and an angle of −135°. In AutoCAD, @−6,−6 or @8.485<225 picks the same point.

How to use

  1. Enter X and Y of the start and end points in the same unit.
  2. Read end-minus-start ΔX and ΔY together with straight-line distance.
  3. Read the angle from the +X axis; coincident points have no defined angle. This does not create an AutoCAD OFFSET line.

Engineering notes

  • Angles are counterclockwise from +X, within −180° to +180°. This is not a north-based bearing.
  • Identical points have zero distance and no defined direction angle.
  • Angles are in the −180° to +180° range. For 0–360°, add 360° to negative angles (−135° → 225°).
  • Survey azimuths are measured clockwise from north (+Y). Convert this tool's angle θ with azimuth = 90° − θ, adding 360° if negative.

Frequently asked questions FAQ

Does this create an AutoCAD OFFSET line?

No. It calculates differences between two points, not parallel geometry or polyline intersections.

Can I use the result for AutoCAD polar input?

With AutoCAD's default settings (0° east, counterclockwise positive), yes: enter it as @distance<angle, and check that the drawing's angle settings (UNITS) have not been changed.

Can it handle 3D offsets?

This tool covers the plane (X and Y) only. For changes including Z and the 3D distance, use the coordinate distance calculator.

KEEP WORKING