MARINE / Rectangular Tank Volume Calculator

Rectangular Tank Volume Calculator

Calculate total capacity, liquid volume, remaining volume and fill percentage for a rectangular tank.

Inputs

Updates as you type

Results

Liquid volume

14.4m³
Results
Liquid volume14,400 L
Liquid volume3,804.078 US gal
Total tank volume24 m³
Total tank volume24,000 L
Total tank volume6,340.129 US gal
Remaining volume9.6 m³
Remaining volume9,600 L
Remaining volume2,536.052 US gal
Fill percentage60 %

Overview

Calculate total capacity, liquid volume, remaining volume and fill percentage for a rectangular tank. Use it to turn soundings of rectangular ballast, fresh water or fuel tanks into volumes, or to set the liquid height for a fill limit.

Formula

Vtotal = L × W × H
Vliquid = L × W × h
Vremaining = L × W × (H − h)
Fill [%] = 100h/H

Example

A 4 m × 3 m × 2 m tank with 1.2 m liquid height has 24 m³ total capacity, 14.4 m³ liquid, 9.6 m³ remaining and 60% fill. Filling the same tank to only 90% means a 1.8 m level, 21.6 m³ of liquid and 2.4 m³ left. If the empty height from the top datum (ullage) is 0.8 m, subtract it from the 2 m reference height and enter a 1.2 m level.

How to use

  1. Enter internal length, width and total height of the rectangular tank, selecting each unit.
  2. Enter liquid height from the same bottom datum; use zero for empty and do not exceed total height.
  3. Read liquid, total and remaining volume plus fill percentage. Convert ullage to liquid height before entering it.

Engineering notes

  • Use internal dimensions. Assumes a level floor and vertical walls; structural members, piping, sumps and vessel trim are excluded.
  • For actual ship tanks, use approved sounding/ullage tables. Geometric remaining volume is not a safe filling limit.
  • A rectangular box has a constant horizontal section, so fill by volume equals the height ratio. This does not hold for sloped bottoms or horizontal cylinders.
  • Volume × liquid density gives mass. For liquids whose density changes with temperature, such as fuel, use the density at that temperature.

Frequently asked questions FAQ

Can liquid height be zero?

Yes. An empty tank has zero liquid volume and 0% fill. A liquid height above the tank height is rejected.

How do sounding and ullage differ?

Sounding is the height from the bottom datum to the liquid surface; ullage is the empty height from the top datum down to it. This calculator takes liquid height, so subtract ullage from the reference height before entering it.

Can I use the tank's outside dimensions?

Outside dimensions include plate thickness and stiffeners and overstate usable capacity. Use the internal dimensions from the drawing or the capacity table.

Related guides

KEEP WORKING

Use the cylindrical tank calculator for a vertical cylinder. Convert the calculated volume with the volume converter, or check connecting pipe capacity with the pipe internal volume calculator.