PIPING / Pipe Weight Calculator

Pipe Weight Calculator

Calculate theoretical pipe mass from actual outside diameter, wall thickness, length and material density.

Inputs

Updates as you type

kg/m³

Results

Total weight

22.195kg
Results
Total weight0.022 ton
Total weight48.932 lb
Weight per meter22.195 kg/m
Inside diameter80 mm
Metal cross-sectional area2,827.433 mm²

Overview

Calculate theoretical pipe mass from actual outside diameter, wall thickness, length and material density. It also gives a quick weight for one length of pipe before pipe-support loads or lifting plans are worked out.

Formula

ID = OD − 2t
Ametal = π(OD² − ID²)/4
Mass per meter = Ametal × ρ
Mass = Ametal × L × ρ
Dimensions: m · Density: kg/m³ · Mass: kg

Example

OD 100 mm, wall 10 mm, length 1 m and density 7,850 kg/m³ give an inside diameter of 80 mm, a metal area of 2,827.433 mm² and a mass of approximately 22.195 kg. A real NPS 4 Sch 40 pipe (114.3 mm OD, 6.02 mm wall) 6 m long weighs about 16.08 kg/m and 96.45 kg in carbon steel, and about 98.30 kg in stainless steel (8,000 kg/m³).

How to use

  1. Enter actual outside diameter and wall thickness, selecting the unit for each field.
  2. Enter pipe length and its unit. Choose a material preset or enter the specified density in kg/m³.
  3. Read total mass, mass per meter, inside diameter and metal area. Fluid and fittings are excluded.

Engineering notes

  • Use actual outside diameter, not the DN or NPS designation. Verify wall thickness against the applicable dimensional standard and schedule.
  • Presets are nominal densities. Manufacturing tolerance, coating, lining, corrosion, fluid and fittings are excluded. Use the specified density for your material and temperature.
  • Outside diameters and walls of standard pipe are in the pipe schedule chart. The same NPS changes wall and weight considerably from one schedule to another.
  • Actual walls can be thinner or thicker than nominal by the mill tolerance; for settlement or lifting loads, check the mill certificate or a measured weight.

Frequently asked questions FAQ

Does total weight include fluid and flanges?

No. This is the theoretical mass of a uniform straight pipe wall. Add internal volume × fluid density, flanges, valves and insulation separately.

How do I get the weight of a pipe full of water?

Add the internal volume × water density (about 1,000 kg/m³) to this result. NPS 4 Sch 40 holds about 8.21 L per meter, so water adds about 8.2 kg/m.

How much heavier is stainless steel pipe than carbon steel?

By the density ratio: this site's 8,000 kg/m³ stainless preset is about 1.9% heavier than 7,850 kg/m³ carbon steel. Stainless 'S' schedules can have different walls, so check the wall first.

Related guides

KEEP WORKING