CAD
Calculate drawing scales, SCALE factors, coordinate distances and offsets.
CAD Scale Calculator
Convert drawing length to real length or the reverse using a 1:n scale and optional scale presets.
Open calculatorScale Conversion Calculator
Calculate the AutoCAD SCALE factor between two drawing scales for the same real object.
Open calculatorCoordinate Distance Calculator
Calculate signed coordinate changes and 2D/3D straight-line distances between two Cartesian points.
Open calculatorOffset Calculator
Find horizontal and vertical coordinate differences, straight distance and the direction angle from the positive X-axis.
Open calculatorCAD Viewer
Open DWG, DXF and DWFx drawings, Gerber PCB data and STEP, IGES, IFC, STL, OBJ, glTF, FBX and 3DS models without installing software. Check layers and layouts, measure distance, volume and mass, and save PDFs.
Open calculatorWhat this section covers
Scale conversions, SCALE factors, distances between coordinates and offsets that drawing work checks often, plus a CAD viewer that opens DWG and DXF drawings and 3D models without installing software.
Scale calculations apply after the drawing and real lengths share one unit. In a CAD model drawn at 1:1 a measurement is the real length, so adjusting the plot scale or viewport is safer than rescaling the geometry.
Which tool should I use?
- CAD Scale Calculator — Turn a length measured on a drawing into the real length, or the reverse
- Scale Conversion Calculator — Get the SCALE factor when pasting in a drawing at another scale
- Coordinate Distance Calculator — Get the 2D and 3D straight-line distance between two points
- Offset Calculator — Get ΔX, ΔY and direction between two points, and AutoCAD relative input
- CAD Viewer — Open DWG, DXF, STEP and similar files without installing software, and measure distance or volume
Common mistakes
- Measuring a reduced print at its original scale: an A1 drawing printed on A3 turns 1:100 into 1:200.
- Enlarging a 1:1 model with SCALE to set the plot scale: dimensions stop matching real size.
- Mixing coordinates from different UCSs or units: bring them to one coordinate system and unit before measuring.
Related guides
- AutoCAD Scale Factor: 1:100 to 1:50 — Calculate drawing-scale conversion factors, check the 100/50 = 2 example, and distinguish rescaling geometry from model-space, viewport and paper-space settings.