UNIT CONVERTER / Flow Rate Converter

Flow Rate Converter

Convert volumetric flow between hourly, minute and second units for pump and piping calculations.

Inputs

Updates as you type

Results

m³/s

2.778e-4m³/s
Results
m³/h1 m³/h
m³/min0.017 m³/min
L/min16.667 L/min
L/s0.278 L/s

Overview

Convert volumetric flow between hourly, minute and second units for pump and piping calculations. Use it to bring different flow notations, such as m³/h on pump nameplates, L/min on instruments and m³/s in calculations, onto one basis.

Formula

1 m³/h = 1,000/60 L/min
1 L/s = 60 L/min = 3.6 m³/h
1 m³/s = 3,600 m³/h

Example

60 L/min equals 1 L/s and 3.6 m³/h. A pump flow of 120 m³/h is 2 m³/min, 2,000 L/min, about 33.333 L/s and about 0.0333 m³/s.

How to use

  1. Enter volumetric flow and select m³/h, m³/min, m³/s, L/min or L/s.
  2. Read equivalent flow rates, checking both the volume unit and time basis.
  3. For gases, keep the same pressure and temperature basis. This tool does not convert standard flow to operating conditions.

Engineering notes

  • This is volumetric flow. Mass flow such as kg/h requires fluid density.
  • Normal, standard and actual gas flow are different reference states and are not automatically converted.
  • Pipe velocity calculations work in m³/s. Use the m³/s value here in the pipe flow velocity calculator, or select the flow unit there and enter it directly.
  • US GPM (US gal/min) is not in this tool. 1 US gpm ≈ 3.785 L/min, so convert to L/min first.

Frequently asked questions FAQ

What is the difference between m³/min and m³/h?

The time bases differ by a factor of 60. Always verify the time unit as well as the numerical flow value.

Can I convert flow to kg/h?

Volumetric flow × fluid density gives mass flow; 3.6 m³/h of water is about 3,600 kg/h. This tool converts volumetric flow only.

Does the same flow give the same velocity in any pipe?

No. Velocity is flow divided by internal area, so it rises as the bore shrinks. Check velocities by bore in the pipe flow velocity calculator.

Related guides

KEEP WORKING

Convert a gas's standard-condition flow (Nm³/h and so on) to operating conditions first with the gas flow standard–actual converter. Calculate average velocity from the actual volumetric flow and the pipe bore, and use the volume converter when only volume units change.