CAD / CAD Scale Calculator

CAD Scale Calculator

Convert drawing length to real length or the reverse using a 1:n scale and optional scale presets.

Inputs

Updates as you type

Results

Real length

5,000mm
Results
Real length5 m

Overview

Convert drawing length to real length or the reverse using a 1:n scale and optional scale presets. Use it to turn a length measured with a ruler on a printed drawing into the real dimension, or a real dimension into the length to draw at a given scale.

Formula

Real length = Drawing length × n
Drawing length = Real length/n
Scale = 1:n

Example

At 1:100, a drawing length of 50 mm represents 5,000 mm or 5 m. A real length of 5 m is shown as 50 mm at this scale. If you measure 37 mm on a 1:50 drawing, the real length is 1,850 mm (1.85 m).

How to use

  1. Select Drawing → real or Real → drawing to match the length you know.
  2. Enter that length and its unit, then enter n for a 1:n scale or choose a scale preset.
  3. Read converted length in the selected unit and in meters; confirm the direction before copying.

Engineering notes

  • Both lengths are converted to a common unit before applying scale.
  • For a full-size CAD model, change viewport or print scale as appropriate rather than rescaling model geometry.
  • A drawing's stated scale changes when it is copied or printed reduced. Check against the scale bar or a known dimension first.
  • When measuring in a CAD file, check that model space is 1:1; in a 1:1 model the measured value is the real length.

Frequently asked questions FAQ

Can I enter an enlargement scale such as 1:0.5?

Yes. Any positive denominator is allowed. At 1:0.5 the drawing length is twice the real length.

How do I find an unknown drawing scale?

Measure a part whose dimension you know and divide the real length by the drawing length to get n. If a real 2,000 mm measures 20 mm on the drawing, the scale is 1:100.

What is the scale of an A1 drawing printed on A3?

A1 to A3 halves every length, so a 1:100 drawing becomes 1:200. Increase the denominator by the reduction ratio.

Related guides

KEEP WORKING

After checking the length relationship, use the current and target scale denominators to find the resize factor. Convert differing drawing units first; use coordinate distance for a segment specified by its endpoints.