UNIT CONVERTER / Length Converter

Length Converter

Compare SI length units with international inches, feet and yards using the meter as the base unit.

Inputs

Updates as you type

Results

mm

1,000mm
Results
cm100 cm
m1 m
km0.001 km
inch39.37 inch
ft3.281 ft
yard1.094 yard

Overview

Compare SI length units with international inches, feet and yards using the meter as the base unit. Use it to bring millimeter drawings and foreign material or equipment dimensions in feet and inches onto one basis.

Formula

1 m = 1,000 mm = 100 cm
1 inch = 0.0254 m
1 ft = 0.3048 m
1 yard = 0.9144 m

Example

1 m equals 1,000 mm, approximately 39.370079 inches and 3.280840 feet. 20 ft is exactly 6.096 m = 6,096 mm = 240 inch. 6 inch is 152.4 mm, and 1 yard is 914.4 mm.

How to use

  1. Enter length and choose mm, cm, m, km, inch, ft or yard as the input unit.
  2. Read the equivalent length in each listed output unit.
  3. Choose decimal places for displayed values and keep the unit with any copied result.

Engineering notes

  • Uses the international foot, not the historical US survey foot.
  • Changing the input unit preserves the entered number and interprets it in the new unit. Signed coordinate differences are allowed.
  • Inch, foot and yard are exact defined values (0.0254, 0.3048 and 0.9144 m), so the conversion itself is exact; rounding happens only in the displayed decimals.
  • For fractional inches, use the mm-to-inch converter, which also shows the nearest 1/64-inch fraction.

Frequently asked questions FAQ

Can I enter 5 feet 6 inches together?

Mixed-unit input is not supported. Enter 5.5 ft or 66 inches instead.

Can it convert miles or nautical miles?

No. 1 mile = 1,609.344 m and 1 nautical mile = 1,852 m, so convert to meters and enter that.

Are ft, feet and ′ the same?

All mean feet. On drawings 5′ 6″ is 5 ft 6 inch; enter it as 66 inch or 5.5 ft.

KEEP WORKING