Steel Weight Calculator
Calculate cross-sectional area, weight per meter and total weight of steel plate, flat, round, square and hexagonal bar, H-beams and angles from their dimensions.
Inputs
Updates as you typekg/m³
Results
Total weight
| Total weight | 0.707 ton |
|---|---|
| Total weight | 1,557.566 lb |
| Weight per piece | 706.5 kg |
| Weight per meter | 117.75 kg/m |
| Weight per square meter | 78.5 kg/m² |
| Cross-sectional area | 150 cm² |
| Cross-sectional area | 15,000 mm² |
Overview
Calculate cross-sectional area, weight per meter, weight per piece and total weight of plate and flat bar, round, square and hexagonal bar, H-beams and angles used for pipe supports, brackets and stands. Choosing a shape shows only the dimensions that shape needs, and changing the material covers stainless steel or aluminum members. Plate also shows weight per square meter (kg/m²) for checking plate quantities or purchase amounts.
Formula
Weight = area × length × density × quantity Plate, flat bar: A = W × t Round bar: A = πD²/4 Square bar: A = a² Hexagonal bar: A = (√3/2) × S² H-beam: A = t1(H − 2t2) + 2Bt2 + (4 − π)r² Angle: A = t(A + B − t) (corner radii excluded) Plate weight per area [kg/m²] = t [m] × density
Example
How to use
- Choose the steel shape and enter the nominal dimensions that appear, with their units. H-beams are H × B × t1 × t2; enter the root radius only if you know it.
- Enter the member length and quantity, and choose a material or type the density in kg/m³.
- Read the total weight (kg, ton, lb), weight per piece, weight per meter and cross-sectional area. For plate, also read the weight per square meter.
Engineering notes
- This is the theoretical weight from dimensions. Rolling tolerances, galvanizing or paint, weld beads, bolt holes and cutting losses are not included.
- For H-beams the web-to-flange fillets are added as (4 − π)r². When comparing with a section table, enter its r value too; the example H 300×300×10×15 (r = 18) matches the KS D 3502 table's 94.0 kg/m, while current JIS G 3192, which uses r = 13, lists 93.0 kg/m.
- Angles are calculated without corner radii, so they can come out about 1% below section tables. For example, L 75×75×6 gives 6.78 kg/m here and about 6.85 kg/m in the table.
- The default density of 7,850 kg/m³ is carbon steel. For stainless steel (8,000 kg/m³) or aluminum (2,700 kg/m³), change the material or type the density from the specification.
- For lifting and transport plans, add fittings and a margin to this weight, and check the rated load of the lifting equipment against its own criteria.
Frequently asked questions FAQ
Why do plate and flat bar share one option?
Both have a rectangular section, so the formula is the same: W × t × length. For flat bar, enter its width as the width and its thickness as the thickness.
Why is the result slightly different from a section table?
Section tables use a nominal area that includes corner radii and fillets. H-beams come out almost the same once the root radius is entered; angles are calculated without radii and come out about 1% lower. Delivered weight can also differ by the rolling tolerance.
Can I calculate steel pipe weight here?
Use the pipe weight calculator for steel pipe. It calculates the ring section from outside diameter and wall thickness and shows weight per meter and inside diameter.
Related guides
Related tools
Calculate steel pipe with the pipe weight calculator. Use the density and weight converters to change density units or to compare the result in pounds or tons.
Pipe Weight Calculator
Calculate theoretical pipe mass from actual outside diameter, wall thickness, length and material density.
Open calculatorDensity Converter
Convert kg/m³ and g/cm³ when transferring material density data into engineering calculations.
Open calculatorWeight Converter
Convert mass between kilograms, metric tonnes, avoirdupois pounds and ounces.
Open calculator