H-Beam Size Chart
Look up dimensions, area, unit mass (kg/m), moments of inertia and section moduli of KS D 3502 and JIS G 3192 H-beams, and total weight from length and quantity.
Inputs
Updates as you typeResults
Unit mass
| Cross-sectional area | 119.781 cm² |
|---|---|
| Root radius · r | 18 mm |
| Moment of inertia · Ix | 20,410.205 cm⁴ |
| Moment of inertia · Iy | 6,754.83 cm⁴ |
| Section modulus · Zx | 1,360.68 cm³ |
| Section modulus · Zy | 450.322 cm³ |
| Radius of gyration · ix | 13.054 cm |
| Radius of gyration · iy | 7.51 cm |
| Weight per piece | 564.17 kg |
| Total weight | 564.17 kg |
KS D 3502 H-beam dimensions and properties
| H × B × t1 × t2 | r · mm | Cross-sectional area · cm² | Unit mass · kg/m | Ix · cm⁴ | Zx · cm³ |
|---|---|---|---|---|---|
| 100×100×6×8 | 10 | 21.9 | 17.2 | 383 | 77 |
| 125×125×6.5×9 | 10 | 30.31 | 23.8 | 847 | 136 |
| 150×75×5×7 | 8 | 17.85 | 14 | 666 | 89 |
| 150×150×7×10 | 11 | 40.14 | 31.5 | 1,641 | 219 |
| 200×100×5.5×8 | 11 | 27.16 | 21.3 | 1,844 | 184 |
| 200×200×8×12 | 13 | 63.53 | 49.9 | 4,716 | 472 |
| 250×125×6×9 | 12 | 37.66 | 29.6 | 4,052 | 324 |
| 250×250×9×14 | 16 | 92.18 | 72.4 | 10,833 | 867 |
| 300×150×6.5×9 | 13 | 46.78 | 36.7 | 7,209 | 481 |
| 300×300×10×15 | 18 | 119.78 | 94 | 20,410 | 1,361 |
| 350×175×7×11 | 14 | 63.14 | 49.6 | 13,559 | 775 |
| 350×350×12×19 | 20 | 173.87 | 136.5 | 40,295 | 2,303 |
| 400×200×8×13 | 16 | 84.12 | 66 | 23,704 | 1,185 |
| 400×400×13×21 | 22 | 218.69 | 171.7 | 66,621 | 3,331 |
| 450×200×9×14 | 18 | 96.76 | 76 | 33,451 | 1,487 |
| 500×200×10×16 | 20 | 114.23 | 89.7 | 47,846 | 1,914 |
| 600×200×11×17 | 22 | 134.41 | 105.5 | 77,632 | 2,588 |
| 700×300×13×24 | 28 | 235.49 | 184.9 | 201,489 | 5,757 |
| 800×300×14×26 | 28 | 267.45 | 209.9 | 291,657 | 7,291 |
Overview
Choose an H-beam size to see its cross-sectional area, unit mass (kg/m), moments of inertia, section moduli and radii of gyration. You can pick KS D 3502 (19 sizes on which two published tables agree) or JIS G 3192 (53 standard sections), and entering a length and quantity gives the weight per piece and in total. For the same nominal size, KS and current JIS can use different root radii r and so slightly different unit masses; the table under the results compares sizes within the chosen standard.
Formula
A = t1(H − 2t2) + 2Bt2 + (4 − π)r² Unit mass [kg/m] = A [cm²] × 0.785 (density 7,850 kg/m³) Ix = BH³/12 − (B − t1)(H − 2t2)³/12 + fillet terms Iy = 2t2B³/12 + (H − 2t2)t1³/12 + fillet terms Zx = Ix / (H/2), Zy = Iy / (B/2) ix = √(Ix/A), iy = √(Iy/A)
Example
How to use
- Choose the standard (KS D 3502 or JIS G 3192) and the H × B × t1 × t2 size. KS offers only the 19 sizes on which two published tables agree.
- If you need total weight, enter the length and quantity. Leave them blank for section properties only.
- Read the unit mass, area, Ix and Iy, Zx and Zy and the radii of gyration, and compare with other sizes of the same standard in the table below.
Engineering notes
- Area and section properties are calculated from the dimensions and root radius r. For the 53 JIS sizes they agree with published tables within 0.05% for area, 0.4% for unit mass and 0.5% for Ix, Iy, Zx and Zy (the tables round to three significant figures).
- KS D 3502 tables use larger root radii than current JIS for many sizes: 300×300 is r = 18 (94.0 kg/m) in KS and r = 13 (93.0 kg/m) in JIS. Check the actual product's standard and the mill's table for ordering and structural checks.
- KS includes only the 19 sizes on which two published tables (kspec.kr, excone.co.kr) agree on area and unit mass. Sizes where they differ, such as 900×300, or that appear in only one, such as 175×175, are left out.
- Unit mass is nominal at 7,850 kg/m³. Actual weight can differ by the rolling tolerance, and bolt holes, splice plates and welds are not included.
- Section properties are inputs to structural checks; they do not judge allowable load or deflection. Design members with the applicable code (KDS, AISC and so on) and structural calculations.
- For sizes not listed or built-up H sections, enter H, B, t1, t2 and r in the steel weight calculator to get area and weight.
Frequently asked questions FAQ
For 300×300, is it 94 kg/m or 93 kg/m?
The standards use different root radii. KS D 3502 tables give r = 18 and 94.0 kg/m; current JIS G 3192 gives r = 13 and 93.0 kg/m. Check KS tables for products sold in Korea and JIS tables for Japanese-standard products.
Are H 300×150 and H 298×149 different products?
They belong to the same 300×150 series but are separate sections with different web and flange thicknesses. 298×149×5.5×8 is lighter than 300×150×6.5×9 (32.0 against 36.7 kg/m in JIS). Check the full H×B×t1×t2 on the drawing.
What are Ix and Zx used for?
Ix (moment of inertia) is used for beam deflection and Zx (section modulus) for bending stress, σ = M/Z. The strong-axis (x) values are much larger than the weak-axis (y) values, which is why H-beams are placed with the web vertical.
Related tools
Enter unlisted or built-up H sections directly in the steel weight calculator. Find splice bolts in the metric bolt and thread chart, and the outside diameter and wall of pipe resting on supports in the pipe schedule chart.
Steel Weight Calculator
Calculate cross-sectional area, weight per meter and total weight of steel plate, flat, round, square and hexagonal bar, H-beams and angles from their dimensions.
Open calculatorMetric Bolt and Thread Chart
Look up pitch, tensile stress area, tap drill and spanner size of M3–M64 metric threads, and calculate proof load and an estimated tightening torque by property class.
Open calculatorPipe Schedule Chart (NPS)
Pipe Schedule Chart
Look up outside diameter, wall thickness, bore and weight per meter of steel pipe by NPS and schedule (Sch 5S–160, STD, XS, XXS), and compare schedules.
Open calculator