PIPING / Pipe Schedule Chart

Pipe Schedule Chart (NPS)

Look up outside diameter, wall thickness, bore and weight per meter of steel pipe by NPS and schedule (Sch 5S–160, STD, XS, XXS), and compare schedules.

Inputs

Updates as you type

kg/m³

Results

Inside diameter

102.26mm
Results
Inside diameter4.026 inch
Outside diameter114.3 mm
Outside diameter4.5 inch
Wall thickness6.02 mm
Wall thickness0.237 inch
Nominal · DNDN 100
Weight per meter16.075 kg/m
Total weight96.45 kg
Internal volume per meter8.213 L/m
Metal cross-sectional area2,047.769 mm²

NPS 4″ (DN 100, OD 114.3 mm) by schedule

ScheduleWall thickness · mmWall thickness · inInside diameter · mmWeight per meter · kg/m
Sch 5S2.110.083110.085.83
Sch 10S3.050.120108.28.36
Sch 406.020.237102.2616.07
STD6.020.237102.2616.07
Sch 40S6.020.237102.2616.07
Sch 808.560.33797.1822.32
XS8.560.33797.1822.32
Sch 80S8.560.33797.1822.32
Sch 12011.130.43892.0528.31
Sch 16013.490.53187.3333.53
XXS17.120.67480.0641.03

Overview

Choose a nominal pipe size (NPS) and a schedule to see the outside diameter, wall thickness, inside diameter and weight per meter of ASME B36.10M and B36.19M steel pipe. The chart covers NPS 1/8 to 24 and Sch 5S and 10S through Sch 160 and XXS, and the table under the results compares every schedule of the chosen size. For one NPS the outside diameter stays the same and only the wall changes, so a heavier schedule means a smaller bore. Enter a length and material to get the total weight as well.

Formula

OD, t: inch values from ASME B36.10M / B36.19M
mm = inch × 25.4
ID = OD − 2t
Metal area A = π/4 × (OD² − ID²)
Weight per meter = A × density
Total weight = weight per meter × length
Internal volume [L/m] = π/4 × ID² [m²] × 1,000

Example

NPS 4 (DN 100) Sch 40 has a 4.500 in (114.30 mm) outside diameter, a 0.237 in (6.02 mm) wall and a 4.026 in (102.26 mm) bore; in carbon steel (7,850 kg/m³) it weighs about 16.07 kg/m and holds about 8.21 L/m. NPS 4 Sch 80 keeps the outside diameter with an 8.56 mm wall, a 97.18 mm bore and about 22.32 kg/m. At NPS 12, STD (9.53 mm, about 73.84 kg/m) and Sch 40 (10.31 mm, about 79.74 kg/m) differ.

How to use

  1. Choose the NPS and the schedule. If the schedule is not listed for that size you get an error; check the table under the results for the schedules that exist.
  2. If you need the total weight, enter the pipe length and the material or density. For dimensions only, the defaults can stay.
  3. Read the outside diameter, wall and bore in mm and inches, and the weight and internal volume per meter. Compare wall and weight with the other schedules of the same size in the table.

Engineering notes

  • Dimensions are nominal values from ASME B36.10M (carbon and alloy steel) and B36.19M (stainless steel, 'S' schedules). Actual walls can be thinner by the mill tolerance; use the minimum-wall basis of the piping specification for strength calculations.
  • Millimeter values are the inch values × 25.4, rounded to two decimals. They can differ from the standard's SI figures by 0.01–0.05 mm (for example, NPS 10 OD 273.05 mm).
  • Sch 40 and STD share a wall up to NPS 10, and Sch 80 and XS up to NPS 8. Above that they can differ, so choose exactly what the drawing says.
  • A few combinations on which published tables disagree (Sch 30 in small sizes, Sch 10 at NPS 10 and 12, and others) are left out. Check schedules missing here in the standard or the manufacturer's data.
  • Weights are theoretical, from the density entered. Contents, insulation, lining, flanges and fittings are not included.
  • DN is a designation, not a dimension. JIS steel pipe (SGP, STPG and so on) can use different outside diameters and walls for the same designation; do not substitute this chart for it.

Frequently asked questions FAQ

Are Sch 40 and STD the same?

They share a wall up to NPS 10. From NPS 12, STD stays at 0.375 in (9.53 mm) while Sch 40 keeps getting thicker; at NPS 12, STD is 9.53 mm and Sch 40 is 10.31 mm.

Does one schedule mean one wall thickness for every size?

No. Sch 40 is 3.91 mm at NPS 2 and 7.11 mm at NPS 6: the wall grows with diameter. A schedule number names a series of walls across sizes, not a thickness.

Why does the NPS number differ from the real outside diameter?

Up to NPS 12 the nominal number and the actual outside diameter differ; NPS 4 measures 4.500 in (114.30 mm). From NPS 14 the nominal number equals the outside diameter in inches.

How do 5S and 10S differ from Sch 5 and 10?

Schedules ending in 'S' are B36.19M stainless steel walls. Up to NPS 12, 40S and 80S equal STD and XS, but from NPS 14, 10S is thinner than Sch 10 (NPS 14: 4.78 mm against 6.35 mm).

Related guides

KEEP WORKING

Use the outside diameter and wall found here in the pipe weight calculator for other lengths or materials, and the bore for internal volume and flow velocity. Enter a measured wall that is not in the chart directly in the pipe weight calculator.